bdstall.com
Computer  / Networking  / Network Switch

ONV H1108PL 10-Port PoE Switch

ID: 95112 Status: Out of Stock

Price in Bangladesh

The lowest price of Onv h1108pl 10-port poe switch in Bangladesh is Tk 5,500 only. Buy ONV H1108PL at low price in Bdstall. There is currently 0 seller.

Full Specification

Item Network Switch
Model ✅ ONV H1108PL
LAN Connectivity Ethernet
Ports 8 x 10/100Base-TX PoE Port (Data / Power)
Uplink Port 2 x 10/100Base-TX Uplink RJ45 Port Data
  • Ethernet Port
    • 1-6/1-10 can support 10/100Base-TX auto-detection, full/half-duplex MDI / MDI-X auto-sensing
  • Functional Switch: 1 x Extend + VLAN
  • Twisted Pair Transmission
    • 10BASE-TX: Cat3, 4, 5 UTP(≤250 meters)
    • 100BASE-TX: Cat5 or later UTP(≤100 meters)
  • Network Protocol
    • IEEE802.3 10BASE-T, IEEE802.3i 10Base-T
    • IEEE802.3u 100Base-TX, IEEE802.3x
  • Forwarding Mode
    • Store and Forward(Full Wire Speed)
  • Switching Capacity: 2Gbps (Non-blocking)
  • Forwarding Rate at 64 bytes: 1.488Mpps
  • MAC: 1K
  • Buffer Memory: 768K
  • Jumbo Frame: 9.6K
  • LED Indicator
    • Power: PWR (Green), Network: L/A(Yellow), PoE: PoE (Green)
    • Functional Switch: EXTEND (Green)
  • PoE & Power Supply
    • Power Supply Pin: 1/2(+) 3/6(-)
    • Maximum Power Per Port: 30W, IEEE802.3af/at
    • Total PWR: 120W
    • Input Voltage: AC100-240V
    • Power Consumption
      • Standby: 5W
      • Full load: 120W
    • Power Supply
      • Built-in power supply, AC100~240V 50-60Hz 2.2A
  • Physical
    • Operation Temperature:-20~+55°C
    • Humidity Temperature: 5~90% RH Non condensing
    • Storage Temperature: -40~+75°C
    • Humidity Temperature: 5%~95% RH Non condensing
    • Dimension: 195 x 130 x 40mm
    • Net Weight: 800gm
    • Lightning Protection: 4KV 8/20us, Protection level: IP30
    • Certification
      • CCC, CE mark, commercial, CE/LVD EN62368-1, FCC Part 15 Class B, RoHS

Description

ONV H1108PL is an unmanaged PoE switch with a total of 10 x 10/100M RJ45 ports. 1 to 8 support IEEE802.3af PoE standard and the remaining two will serve as uplink RJ45 data ports. This switch has a single PoE port power of up to 30W and a maximum PoE output power of 120W. It can automatically detect power-consuming equipment and provide power through network cables. Plug and play, no configuration required, and very easy to use. Can be used by hotels, campuses, factories, and small and medium businesses.

Review by Bdstall

Stable and Reliable: This switch uses low power consumption, surface galvanized steel casing, and no fan. Also, a user-friendly panel that shows device status via PoE's LED indicator. The self-developed power supply, and high redundancy design, will provide a long life span and stable PoE power output at all times.

Video Monitoring Mode: Ports 1-8 are isolated from each other but communicate with ports 9-10 to prevent DHCP conflicts, optimize cache usage, and reduce broadcast storms.

Long-Distance Mode: Ports 1-8 of this network switch have been slowed down to 10M. But the transmission distance can be increased to 250 meters using twisted pair cable. On the other hand, it can solve the problem of poor transmission brought on by line aging.

Recently Viewed Item
Popular Network Switch Brand
User Review
(0 Review)