Noyafa NF-8209 Advanced Network Cable Tracker
)
)
)
Price in Bangladesh
The lowest price of Noyafa nf-8209 advanced network cable tracker in Bangladesh is Tk-9,500/= only. Buy at low price in Bdstall. There is currently 0 seller.
Full Specification
| Item | Cable Tester |
|---|
- Material: ABS
- Transmitter Function
- Wiretap, Length Test
- Cable scan, PoE Testing
- Port flash, Lighting Function
- Mode
- Digital Mode
- Analog Mode
- PoE Mode
- Wiremap
- Cable type: CAT5, CAT6, STP & UTP
- Test with a switch directly: Yes
- Max range: 600m
- Length
- Cable type: CAT5, CAT6, STP & UTP
- Test range: 2~200m
- Accuracy: ±1.6m
- Breakage Location: Yes
- Scan
- Cable type: CAT5, CAT6, STP & UTP
- Max. signal voltage: 8Vp-p
- Frequency: 130KHz
- AC filter: Yes
- Max range: 600m
- PoE
- Test Range: DC 5~60V
- Voltage display: Yes
- PoE type: IEEE 802.3af/at
- LCD Display: 128 x 64
- Power Supply: AAA x 3
- Low Battery Warning: 2.7V
- Auto-Off Time: 15min, 30min, 60min
- Voltage Protection: DC48V 5mA
- Max Working Current: <150mA>
- Sensitivity Adjustable: Yes
- AC Voltage Detecting: Yes
- Lamp: Yes
- Battery Type: 9V x 1
- Max Working Current: <100mA>
- Wiremap Port: RJ45
- Voltage protection: DC48V 5mA
Description
Noyafa NF-8209 Tracker has 3 cable tracing modes namely Digital, Analog, and PoE. It generates tones in either digital or analog mode to quickly find wires that are strong and clear. Its PoE scan mode can detect cable tracing and open, short, cross, and split to check the cable map. Moreover, this Noyafa NF-8209 tracker allows checking 5 common connection problems, measuring LAN cable length with a range of 2.5m - 500m, and checking PoE device information, PoE voltage, power supply polarity mode, and PSE.
Review by Bdstall
Cable scan: To scan the transmitter with it, connect the test cable to the port and select the desired scan mode in the scan menu.
NVC induction pen: This pen allows accurate electricity measurement, which can be used safely.
Port Flash: It has POE & PING on one side which can be accessed by selecting Port Flash. It features a red circle that will flash at the same frequency as the switch's led light.
