Netis P110C 10-Port Fast Ethernet PoE Switch
ID:
95282
Status: Out of Stock
)
What is the price of Netis P110C in Bangladesh
The lowest price of Netis P110C in Bangladesh is Tk-4,100/= only. Buy P110C at low price in Bdstall. There is currently 0 seller.
Netis P110C Full Specification
| Item | Network Switch |
|---|---|
| Model | ✅ P110C |
| Brand | Netis |
| Ports | 8 x 10/100Mbps POE ports (Data/Power) |
| Uplink Port | 2 x 10/100M uplink RJ45 ports (Data) |
| Protocol | IEEE 802.3 & IEEE802.3u |
- Basic Function
- Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
- Store-and-forward switching scheme
- Support IEEE802.3X full duplex and Backpressure half duplex
- MAC addresses auto-learning & auto-aging
- Standards
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3i 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3af/at, Power over Ethernet
- IEEE 802.3x Flow Control
- Mode: Normal switch mode / Extend mode
- Data Transfer Rate
- Ethernet: 10Mbps (Half-duplex); 20Mbps (Full-duplex)
- Fast Ethernet: 100Mbps (Half-duplex); 200Mbps (Full-duplex)
- Store & Forwarding: Yes
- Switching Capacity: 2G
- MAC Address Table Size: 2K
- Jumbo Frame: 2048 byte
- Power Input POE Standards
- Single port maximum power: 30W
- Whole switch's maximum power: 120W
- Support over-current,over-voltage, and short-circuit protection
- Support Soft Start of High Power PD
- Support sequential boot-up
- Power Supply Pin: 12+/36-
- AC 110-240V 50/60Hz
- Cabling Type
- 100Base-TX: Cat 5e or better UTP/STP(≤100m)
- 10Base-TX: Cat 5e or better UTP/STP(≤250m)
- Environment
- Operation Temperature: 0℃-40℃
- Storage Temperature: -40℃-70℃
- Operation Humidity: 10%-90% RH Non-condensing
- Storage Humidity: 5%-90% RH Non-condensing
- Dimension (L x W x H): 190 x 140 x 43 mm
Netis P110C Description
The Netis P110C Fast Ethernet PoE switch has 2 10/100M uplink RJ45 ports and 8 10/100Mbps POE ports for data. Additionally, it has a steel casing and a 120W total POE power budget. This gigabit uplink PoE switch enables auto MDI/MDIX crossover for all ports and non-blocking wire-speed forwarding. And, fast Ethernet PoE switches provide both full-duplex based on IEEE 802.3x and half-duplex based on Backpressure.
Recently Viewed Item
Popular Network Switch Brand
