Netis P106C 6-Port Standard PoE Switch
ID:
95280
Status: Out of Stock
)
What is the price of Netis P106C in Bangladesh
The lowest price of Netis P106C in Bangladesh is Tk 3,000 only. Buy P106C at low price in Bdstall. There is currently 0 seller.
Netis P106C Full Specification
| Item | Network Switch |
|---|---|
| Model | ✅ P106C |
| Brand | Netis |
| Ports | 4 x 10/100Mbps POE ports (Data/Power) |
| Uplink Port | 2 x 10/100M uplink RJ45 ports (Data) |
| Protocol | IEEE 802.3 & IEEE802.3u |
- Basic Function
- Supports POE IEEE 802. 3af/at compliant Powered Device (PD)
- Store-and-forward switching scheme
- Support IEEE802.3X full duplex and Backpressure half duplex
- MAC addresses auto-learning & auto-aging
- Standards
- IEEE 802.3 10BASE-T Ethernet
- IEEE 802.3i 10BASE-T Ethernet
- IEEE 802.3u 100BASE-TX Fast Ethernet
- IEEE 802.3af/at, Power over Ethernet
- IEEE 802.3x Flow Control
- Mode: Normal switch mode / Extend mode
- Data Transfer Rate
- Ethernet: 10Mbps (Half-duplex); 20Mbps (Full-duplex)
- Fast Ethernet: 100Mbps (Half-duplex); 200Mbps (Full-duplex)
- Store & Forwarding: Yes
- Switching Capacity: 1.2G
- MAC Address Table Size: 2K
- Jumbo Frame: 2048 byte
- Power Input POE Standards
- Single port maximum power: 30W
- Whole switch's maximum power: 60W
- Support over-current,over-voltage, and short-circuit protection
- Support Soft Start of High Power PD
- Support sequential boot-up
- Power Supply Pin: 12+/36-
- AC 110-240V 50/60Hz
- Cabling Type
- 100Base-TX: Cat 5e or better UTP/STP(≤100m)
- 10Base-TX: Cat 5e or better UTP/STP(≤250m)
- Environment
- Operation Temperature: 0℃-40℃
- Storage Temperature: -40℃-70℃
- Operation Humidity: 10%-90% RH Non-condensing
- Storage Humidity: 5%-90% RH Non-condensing
- Dimension (L x W x H): 155 x 115 x 34 mm
Netis P106C Description
Netis P106C standard PoE switch comes with 4 x 10/100Mbps POE ports (Data/Power) and 2 x 10/100M uplink RJ45 ports (Data). This gigabit uplink PoE switch supports non-blocking wire-speed forwarding and auto MDI/MDIX crossover for all ports. Additionally, full-duplex based on IEEE 802.11ac is provided via fast Ethernet PoE switches based on 3x and half-duplex backpressure.
Recently Viewed Item
Popular Network Switch Brand
