Hammer 3000 Kg Heavy-Load Cargo Lift
ID:
118289
Status: In Stock
)
)
)
)
)
Price in Bangladesh
The lowest price of Hammer 3000 kg heavy-load cargo lift in Bangladesh is Tk 1,800,000 only. Buy from Dhaka at low price in Bdstall. There is currently 1 seller.
01886170585
8 days ago
1 year parts
1 year service
NewFull Specification
| Item | Lift |
|---|
- General Specification
- Lift Type: Heavy-duty cargo lift
- Load Capacity: 3000 kg (3 tons)
- Rated Speed: 0.25 m/s to 0.5 m/s (variable depending on model)
- Drive System: Traction or hydraulic (traction lifts are typically faster and more energy-efficient)
- Number of Stops: Variable, based on building requirements
- Control System: Microprocessor or PLC-based control system
- Cabin (Lift Car) Specification
- Cabin Width: 2000 mm to 3000 mm
- Cabin Depth: 2500 mm to 3500 mm
- Cabin Height: 2000 mm to 2500 mm (adjustable based on requirements)
- Cabin Material:
- Steel-reinforced structure
- Heavy-duty stainless steel or powder-coated finish for durability
- Anti-slip flooring (rubberized or checkered steel plate)
- Lighting: LED or fluorescent lighting inside the cabin
- Door Type
- Manual or automatic sliding doors (preferred for ease of use)
- Roll-up shutter doors can also be an option for industrial usage
- Door Size: 1500 mm to 2000 mm wide, 2000 mm to 2500 mm high
- Shaft and Pit Dimension
- Shaft Width: 3000 mm to 3500 mm
- Shaft Depth: 3500 mm to 4000 mm
- Pit Depth: 1200 mm to 1500 mm (deeper pit for hydraulic lifts)
- Overhead Clearance: 4000 mm to 5000 mm above the highest landing (for motor and mechanical components)
- Drive System
- • Traction Type (preferred for higher floors or faster speeds)
- Gearless or geared traction system
- AC variable frequency drive (VFD) for smooth acceleration and deceleration
- • Hydraulic Type (suitable for fewer floors or lower speed)
- Hydraulic ram or piston system
- Suitable for lower-rise buildings (up to 4-5 floors)
- Slower speed but better for heavy lifting
- • Motor Power
- Typically 18 kW to 30 kW depending on the lift speed and load capacity
- • Traction Type (preferred for higher floors or faster speeds)
- Control System
- • Type: Programmable Logic Controller (PLC) or microprocessor-based system
- • Operation Modes
- Simplex or duplex (multiple lifts)
- Full collective control for efficient operation
- • Display and Indicators: Digital display for floor numbers, weight indicators, overload warning
- • Control Panel
- Buttons for floor selection, emergency stop, and door open/close
- Optional remote control or key-locked panels for secure operation in industrial settings
- Safety Features
- Overload Protection: Built-in weight sensors to prevent overloading
- Emergency Stop Button: Located inside the lift and on each landing
- Emergency Alarm: Audible alarm system inside the cabin
- Manual Lowering System: For hydraulic lifts, in case of power failure
- Automatic Rescue Device (ARD): For traction lifts, to move the lift to the nearest floor during a power failure
- Door Safety: Infrared door sensors or mechanical safety edges to prevent the doors from closing on objects
- Safety Gear: Instantaneous safety gear for preventing free fall
- Fire-rated Doors: Fire-resistant doors in industrial environments
- Electrical and Power Requirements
- Power Supply: 3-phase, 380V/400V/415V, 50 Hz or 60 Hz
- Motor Rating: 18 kW to 30 kW (depending on motor type and speed)
- Voltage Stabilizer: For a 3000 kg lift, a voltage stabilizer rated at 50 kVA to 60 kVA is recommended (to handle starting surge and ensure consistent power supply)
- Backup Power: Optional UPS or diesel generator for uninterrupted operation in case of power failure
- Energy Efficiency
- Regenerative Drives: Optional feature to convert excess energy from braking into usable electricity, reducing energy consumption
- LED Lighting: Low-power, long-lasting lighting in the cabin
- Standby Mode: Energy-saving mode when the lift is not in use
- Additional Features
- Ventilation: Ventilation fans or air conditioning for temperature control in the cabin
- Intercom System: Communication system between the cabin and building control room or security office
- Load Weighing Device: Automatically stops the lift if the load exceeds its rated capacity
- Signalization: External and internal LED displays for floor position and operational status
- Compliance and Certification
- Standards
- EN 81-20/50 (Safety and design of elevators)
- ISO 8383 (Lifts for goods)
- Local building codes and standards
- Fire Resistance: Fire-resistant doors and materials, compliant with
- local fire safety codes
- Seismic Protection: Optional seismic protection system for buildings in earthquake-prone areas
- Standards
- Dimension and Weight
- Overall Shaft Size: Approx. 3500 mm (width) x 4000 mm (depth)
- Lift Weight: The total weight of the lift can vary, but it’s typically between 3000 kg and 4000 kg depending on the materials used and whether the lift has a soundproof or weatherproof canopy.
- Noise Level
- • Noise Level: 70-80 dB (depending on the design and usage)
Description
This Hammer is a heavy-load cargo lift with a maximum load capacity of 3000 kg / 3 ton. This elevator is designed to transport large loads, so are generally suitable for use in warehouse, factory or industrial settings. Its speed is 0.25 m/s to 0.5 m/s, but varies depending on the model. It has AC variable frequency drive (VFD) for smooth acceleration and deceleration.
Recently Viewed Item
Popular Lift Brand
