Dinstar UC100-1V1S1O SME IP PBX
ID:
93628
Status: Out of Stock
)
)
Price in Bangladesh
The lowest price of Dinstar uc100-1v1s1o sme ip pbx in Bangladesh is Tk 14,500 only. Buy Dinstar UC100-1V1S1O at low price in Bdstall. There is currently 0 seller.
Full Specification
| Item | PABX System |
|---|---|
| Model | ✅ Dinstar UC100-1V1S1O |
| Type | IP / Hybrid |
- FXS / FXO / LTE interface on a single device
- Send / receive calls from PSTN / PLMN via FXO
- Flexible dial plan, via time, numbers, source IP
- High-speed NAT forwarding, support WIFI hotspot
- Built-in SIP server, supports up to 32 SIP Extensions
- User-friendly web interface
- Multiple management ways
- IVR customization
- Physical Interfaces
- 1 x FXS Port
- 1 x FXO Port
- 1 x SIM Slot
- Ethernet Interfaces
- 1 x WAN & 3 x LAN 10/100 Base-T RJ45
- WIFI: 2.4GHz 802.11b/g/n, 2T2R
- FXS
- Connector: RJ11
- Caller ID:
- Bell core Type 1&2, ETSI, BT, NTT & DTMF
- Answer and Disconnect Signaling
- Answer, Disconnect, Busy Tone
- Polarity Reversal
- Hook Flash
- Mobile:
- GSM / GPRS / EDGE: 900 / 1800MHz
- WCDMA(3G)
- UMTS / HSDPA / HSPA+ B1 / B8
- TD-SCDMA B34 / B39
- LTE(4G)
- TDD-LTE B38 / B39 / B40 / B41
- FDD-LTE B1 / B3 / B7 / B8
- SIM/USIM: 1 USIM per Channel
- SIM Card: 1.8V, 3.0V
- Antenna: 3.0dB, SMA Interface
- SMS / USSD
- FXO
- Connector: RJ11
- Caller ID: FSK, DTMF
- Polarity Reversal
- Answer Delay
- Busy Tone Detection
- No Current Detection
- Voice Capabilities
- VoIP Protocols: SIP over UDP / TCP / TLS, SDP, RTP
- Codecs: G.711a/μ law, G.723.1, G.729A/B,
- Silence Suppression
- Comfort Noise Generator(CNG)
- Voice Activity Detection(VAD)
- Echo Cancellation: G.168 with up to 128ms
- Dynamic Jitter Buffer
- Adjustable Gain Control
- Automatic Gain Control (AGC)
- Call Progress Tones: Dial Tone, Ring Back Tone, Busy Tone
- FAX: T.38 and Pass-through
- NAT: STUN / UPnP / Static NAT
- DTMF: RFC2833 / SIP Info / In-band
- Software Features
- SIP Trunk
- 32 SIP Register Users
- Ring Group
- Routing Groups
- Paging
- Caller/Called Number Manipulation
- Routing Base on Time Period
- Routing Base on Caller/Called
- Prefixes
- Routing Base on Source Trunks
- Dial Rules
- Failover Routing
- FXO Impedance Auto Match
- IVR Customization
- Auto Attendant Function
- CDRs
- Supplementary Services
- Call Forward (Unconditional / No Answer / Busy)
- Call Waiting
- Call Hold
- Call Transfer
- Hotline
- Do-not-disturb
- 3 Way Conference
- Maintenance
- Web GUI Configuration
- Telnet Management
- Configuration Restore/Backup
- Multiple Languages Supported
- HTTP /HTTPS / FTP Firmware Upgrade
- Auto Provision
- CDR Report and Export
- Syslog
- Ping and Tracert
- Traffic Statistics: TCP, UDP, RTP
- Network Capture
- NTP
- Network
- Access Rules
- DHCP Client/ DHCP Server
- Port Forward, DMZ, Static Routes
- UPnP Client / DDNS
- PPTP / L2TP / OpenVPN Client
- Environmental
- Power Supply: 12VDC, 1A
- Power Consumption: 10W
- Operating Temperature: 0~45℃
- Storage Temperature: -20~80℃
- Humidity: 10-90% Non-Condensing
- Dimension (W x D x H): 126 x 75 x 25mm
- Weight: 700gm
Description
Dinstar UC100-1V1S1O is a multi-functional SME IP PBX that integrates voice services such as PSTN and VoIP and data services such as LTE4G / WCDMA 3G. It has three voice interfaces which are GSM/LTE, FXS, and FXO. It can provide seamless connectivity to VoIP networks, PLMN and PSTN. It has WiFi technology that can enable high-speed data handling. Also, users can enjoy high-speed internet surfing using WiFi or LAN port. This IP PBX is suitable for small and medium enterprises.
Recently Viewed Item
Popular PABX System Brand
